>
>
Ceramic Slurry Pump Manufacturers china talks about the cause of leakage of slurry pump packing

Ceramic Slurry Pump Manufacturers china talks about the cause of leakage of slurry pump packing

[Abstract]:
Among many fillers, asbestos fillers are currently relatively widely used fillers. After drying and hardening, a lumpy phenomenon will form. This will make the contact area between the mud pump and the pump shaft larger.

The slurry pump may leak in the filler during use. The following editor of Ceramic Slurry Pump Manufacturers china will introduce the reasons for the leakage of the slurry pump filler.
1. Among many fillers, asbestos fillers are currently relatively widely used fillers. After drying and hardening, a lumpy phenomenon will form. This will make the contact area between the mud pump and the pump shaft larger.
2. The filling replacement period is too long, the filling is aging, the packaging quality is poor, the structure is loose, and it is easy to wear. At this time, the packaging needs to be replaced.


3. During the operation of the pump, if the packing gland is too tight, the packing will fill the pump shaft, so that the water in the water seal ring cannot pass smoothly, which will cause the packing to fail due to overheating and hardening.
4. The inner ring of the mud pump water seal ring is too small, the number of small holes on the ring is insufficient or blocked, the installation position of the water seal ring is incorrect, the water seal pipe is blocked; the gap between the packing gland and the pump shaft is too small, etc. The cause of the leakage of mud pump packing.
The above is the introduction of the editor of Ceramic Slurry Pump Manufacturers china: the reason for the leakage of mud pump packing.

New Application of TB Turbo Vacuum Pump in Paper Mill
$!info.title
In the process of paper making, vacuum technology is mainly used for vacuum dewatering of paper machine. At present, most of the vacuum equipment in paper mill are liquid ring vacuum pumps with high energy consumption, low efficiency and pollution of water resources, which is difficult to meet the energy-saving and emission reduction goals proposed by the government.
Typical Application of Roots Blower in MAERZ Lime Kiln
$!info.title
MAERZ Lime Kiln (also called Co-Current Heat Accumulated Kiln with Double Shafts) is developed by a Switzerland company named MAERZ OFENBAU AG and awarded the technology patent in 1965. This company is the leading engineering company providing patented technology Lime Kiln used for producing high quality Lime and Dolomite. More than 500 units Lime Kilns have been established in more than 50 countries all over the world.
Typical Application of Blower in FGD of Power Plant
$!info.title
Desulphurization of power plant refers to a process that to remove sulfur oxides (SO2 and SO3) from Flue Gas or other industrial waste gas.  
Shandong Zhanggu - Shanghai Lymax Leading technology in coking waster water field
$!info.title
We are a creditable public company with over 50 years of history on researching and producing blowers, and have become one of the most important blower manufacturers in the world.
Shandong Zhangqiu Blower Co., Ltd. - Environmental Protection Development
$!info.title
We are a creditable public company with over 50 years of history on researching and producing blowers, and have become one of the most important blower manufacturers in the world.
Page up
1
2
3
4
5
6
7
8
9
...
14
zhanggu