>
>
The reason why customized SSR Roots Blower runs stuck

The reason why customized SSR Roots Blower runs stuck

[Abstract]:
Customized SSR Roots Blower gets rusted inside and out when water gets in when out of service or in use. Extensive rust can cause the impeller to seize. In this case, it is necessary to clean the rust with kerosene soaking, gasoline flushing, etc., and adjust the gap.

Sometimes when we run the customized SSR Roots Blower, it will freeze, why is this? Let's take a brief look at it together!
1. When the customized SSR Roots Blower is deactivated or in use, water enters, and the interior and exterior are rusted. Extensive rust can cause the impeller to seize. In this case, it is necessary to clean the rust with kerosene soaking, gasoline flushing, etc., and adjust the gap.
2. Check whether the power supply is disconnected
3. Check whether the motor is damaged and not working properly.
4. The occlusion area of ​​the gear is about 2/3, and it is larger than the occlusion area. The occlusion force between the gears is too large, so that the gear cannot rotate, resulting in the impeller not moving.


5. Due to the poor lubrication of the bearing, the rotor deviates from the direction during use, resulting in a change in the gap between the rotor and the wall, causing friction in the impeller and preventing the fan from rotating, which is an indirect cause of the change in the impeller gap. It is a common cause of impellers not turning.
6. Large particles enter the inside of the fan and block the gap between the components, so that the fan does not rotate. To clean the inner cavity in time, check whether there is a gap between the impellers. Avoid recurring failures when checking the cause of foreign objects falling.
The above is an introduction to the reasons why customized SSR Roots Blower is stuck at runtime.

New Application of TB Turbo Vacuum Pump in Paper Mill
$!info.title
In the process of paper making, vacuum technology is mainly used for vacuum dewatering of paper machine. At present, most of the vacuum equipment in paper mill are liquid ring vacuum pumps with high energy consumption, low efficiency and pollution of water resources, which is difficult to meet the energy-saving and emission reduction goals proposed by the government.
Typical Application of Roots Blower in MAERZ Lime Kiln
$!info.title
MAERZ Lime Kiln (also called Co-Current Heat Accumulated Kiln with Double Shafts) is developed by a Switzerland company named MAERZ OFENBAU AG and awarded the technology patent in 1965. This company is the leading engineering company providing patented technology Lime Kiln used for producing high quality Lime and Dolomite. More than 500 units Lime Kilns have been established in more than 50 countries all over the world.
Typical Application of Blower in FGD of Power Plant
$!info.title
Desulphurization of power plant refers to a process that to remove sulfur oxides (SO2 and SO3) from Flue Gas or other industrial waste gas.  
Shandong Zhanggu - Shanghai Lymax Leading technology in coking waster water field
$!info.title
We are a creditable public company with over 50 years of history on researching and producing blowers, and have become one of the most important blower manufacturers in the world.
Shandong Zhangqiu Blower Co., Ltd. - Environmental Protection Development
$!info.title
We are a creditable public company with over 50 years of history on researching and producing blowers, and have become one of the most important blower manufacturers in the world.
Page up
1
2
3
4
5
6
7
8
9
...
14
zhanggu