04
2022
-
01
A brief introduction to the basic knowledge of Liquid Ring Vacuum Pump manufacturers
Author:
A Liquid Ring Vacuum Pump manufacturers, the two exhaust ports of the pump body are respectively connected to the two inlets at the lower part of the gas-water separator through a pipeline, and the two intake ports are used to connect to the gas pipeline to be pumped; gas-water separation The upper end of the device is equipped with an exhaust pipe; the lower part of the gas-water separator is connected with a drain pipe, and the other end of the drain pipe penetrates into the circulating water tank and hangs above the inside of the circulating water tank, and is connected with a nozzle. The upper end of the circulating water tank is open, and A motor is fixed at the opening. The output shaft of a motor extends into the upper part of the circulating water tank and is equipped with centrifugal fan blades. There are multiple jet nozzles on the air pipeline, and the right end of the aeration pipeline passes through the wall of the circulating water tank and communicates with the air outlet of the external air compressor; the inner cavity of the pump body is connected to the bottom of the circulating water tank through the water inlet pipe. The working fluid of Liquid Ring Vacuum Pump manufacturers can be recycled, which can help save water resources and avoid environmental pollution.
The above is a brief introduction to the relevant little knowledge about Liquid Ring Vacuum Pump manufacturers.
RELATED NEWS
SHANDONG ZHANGQIU BLOWER CO., LTD
ADD：Mingshui Economic Development Zone, Zhangqiu District,Jinan City,250200
TEL：+86-531-83250080
FAX：+86-531-83250082
+8653183250080
+8653183250080
info@blower.cn
© 2022 Shandong Zhangqiu Blower Co., Ltd SEO Tag